Cleaning and Sterilization Equipment & Devices

Cleaning and Sterilization Equipment and Devices Provider Reviews are provided below. If you would like assistance in obtaining a quotation we provide a free "Get Quote" email forwarding service and will direct your enquiry to the relevant provider/supplier requesting that they contact you directly. We provide this as a free service to site visitors in accordance with site terms and conditions. Please note that any commercial transactions that may subsequently take place are strictly between the supplier/provider and the site visitor, the operators of News-Medical.net are not a party to any transaction and do not endorse any of the products or services or provide any representations or warranties that they are suitable to the personal circumstances of any individual site visitor.

To promote your Products or Services in the News-Medical.Net Directory please email

Medical Devices
SONOREX DIGITEC DT1028F is used especially for sonication of samples in laboratory flasks and for fast degassing flat ultrasonic bath with a stainless steel tank.
Sporting a shiny, clean, glistening stainless steel exterior, the Monarch is an engineering marvel and a true innovation, but the real beauty of this machine on the inside.
At the forefront of modern dentistry, Lisa fully automatic is a technological masterpiece, integrating on-board computer, traceability system and made-to-measure type B sterilization cycles.
The Reliant’s powerful drying pump, combined with a bacteria filter, provides end-of-cycle forced ventilation for complete drying. This sterilizer is also equipped with numerous safety features including a triple-safety door, LED readout and cycle counter.
The Sterilair PRO is the new air sterilization system. It has an all new appliance for sterilizing the air, which ensures the elimination of all the microorganisms, including the spores.
The SYSTEM70 is a fully automated medical waste processor that simultaneously shreds and disinfects clinical and medical waste; reducing its volume by up to 90 percent, and rendering it non-infectious by using an EPA-registered disinfectant.
The semi-automatic laboratory autoclave series is an affordable sterilizer for laboratories that do not want to compromise on quality, safety and reliability and need to sterilize loads with low sensitivity.
The TBAB-MAX incinerator is designed for continuous or intermediary use, with burn rates of 250-500kg per hour dependant on the waste streams available to be incinerated and local laws to be adhered to.
The new ELx405 Select Deep Well Microplate Washer is a robot compatible, full plate washer incorporating BioTek’s patented Dual-Action manifold with independent filling and evacuation control for precise overfill washing and overflow protection.
The BVX 3 air filter is very simple and reliable filter tightening system. The Filtering ceiling with unidirectional flow enabling the obtaining of ISO 5 according to the norm EN ISO 14644-1 at the required air renewable rate.
The EHS is our fastest tabletop autoclave. This is achieved with a jacketed double walled chamber, which acts as an instant supply of steam and keeps the autoclave warm and ready for use.
CD-4800 ultrasonic cleaners are professional digital ultrasonic cleaners for scientific labs, medical, parts and dental clinics.
The 405 Touch Microplate Washer features the new patented Verify Technology, which runs an automated QC check for manifold tube blockage, and visually reports any failed wells.
Elmasonic S 150 is specifically designed and suitable for the cleaning of DIN-medicine baskets. State-of-the art microprocessor controlled ultrasonic cleaning and sweep technology. The user-friendly LED-display ensures an excellent operation.
The new Sonorex Digitec flat ultrasonic baths offer a very shallow bath for fast degassing for sample preperation and are available in three different sizes ranging from 1.85 litres to 9.5 litres.
The ImmunoWash 1575 microplate washer is essential for performing accurate and reproducible immunoassays in a microplate format, such as ELISA.
The wall-mounted recirculation modules from Marchhart are used as an self-contained recirculation venting system for the supply air in filter ceilings, located in the room or wall niche area.
A lint seperator protects exhaust air ducts and the air conditioning system in operating theatres, sterile rooms and rooms for the pharmaceutical industry from fluff and lint.
The MP-200 is specifically designed to dispose of Category 2, 3 and 4 type red bag wastes with high density and high moisture contents.
The ISS performs both shredding and waste steam sterilization in a single vessel. The vessel is fitted with a motor driven shaft, with powerful shredding/crushing blades which reduce the size and volume of the waste.
The low turbulence ventilation system with laminar displacement flow contributes to protect against contamination caused by airborne particles and germs, and it reduces the risk of post-operative infections.
This sterilizer is configured for prevacuum sterilization of heat- and moisture-stable materials used in healthcare facilities. Prevacuum configuration sterilizers are equipped with prevacuum, leak test, and Bowie-Dick test cycles.
Bondtech compactors are enclosed, secure, hygienic and safety. Our equipment will reduce waste volumes by up to six/one times, therefore providing an often significant waste handling and eliminating or reducing such issues as odors, spillage, wind scatter, infestation or fire risk.
The compact range is available in either the 'Classic' or 'Autofill' format. With the 'Classic' model, water fill is manual; during the cycle condensate leaves the vessel via a silicone tube that is connected to a heat resistant bottle.
The MP-100 is specifically designed to dispose of Category 2, 3 and 4 type red bag wastes with high density and high moisture contents.