Disclaimer: Product availability may vary from country to country and is subject to varying regulatory requirements. Please contact Siemens Healthineers directly for availability.
- Real-time PCR thermal cycler with compact design
- Robust magnetic induction technology
- Analyze up to 48 reactions
Discover Fast Track cycler, Fast Track Diagnostics' new real-time PCR thermocycler.
Fast Track cycler (FTC) uses magnetic induction technology leading to robust and reproducible results. Magnetic induction does not age and does not drift thus no calibration or maintenance are required.
With its compact design of 130x150x150 mm and its weight of only 2 kg, this accurate real-time PCR thermocycler fits in any laboratory and is ideal for an easy and fast assay setup process. In addition, no reference dyes are needed.
FTC uses wireless communication: 10 cyclers can be connected to 1 computer and thus analyse up to 480 reactions at the same time.
This rotary based instrument allowing uniform heating performs with its own intuitive software, providing laboratories greater efficiency and faster cycling times. Using a universal pre-set protocol for all lyophilised kits, FTC will maximise productivity of the diagnosis workflow.
Real-time PCR thermocycler, rotary based and featuring wireless robust communication and magnetic induction technology to maximise productivity during the diagnosis workflow with Fast Track lyophilised kits.
Research use only (RUO). Not for use in diagnostic procedures.
Up to 10 Fast Track cyclers (480 reactions) can be connected to 1 computer through wireless communication
- Fully pre-configured: PCR profile template and assay plugins already included in the cycler software
- Combine multiple runs from multiple instruments in one analysis
- Using a standard curve, absolute quantification analysis allows you to determine the absolute amount of a pathogen
- File size: 60.2 MB
With FTC kits: One pipetting step: just add your extract directly into the tubes and start the run.
With FTlyo kits: two pipetting steps :1) Resuspend the lyo reagent from its original tube with your extract 2) transfer it into the FTC tubes and start the run.
100-240 VAC, 50/60 Hz 4.0 A
- Temperature accuracy: ± 0.25oC
- Temperature uniformity: ± 0.05oC
- Ramp rates: 4oC/s (Heating) / 3oC/s (Cooling)
- Temperature Input Range: 35-99°C (min 40°C when cycling)
- Detectors: High sensitivity photodiode per channel
- Excitation sources: High energy light emitting diode per channel
- Green: Ex. 465 nm / Em. 510 nm filters
- Yellow: Ex. 540 nm / Em. 570 nm filters
- Orange: Ex. 585 nm / Em. 618 nm filters
- Red: Ex. 635 nm / Em. 675 nm filters
- Acquisition time: 1 s
- Reaction per instrument: 48
- Volume range: 5-30 µL
- FTlyo reaction volume: 15 µL
- Temperature: 18-30°C
- Relative humidity: 20-80%
- FTlyo kits: resuspended lyophilised reagents must be transfered in FTC-compatible tubes (can be ordered separately). For more information, please consult this dedicated presentation (link).
Product availability may vary from country to country and is subject to varying regulatory requirements. Please contact your FTD organisation for further details.