EZ-2 Series evaporator designed to suit solvent removal needs of most laboratories

The compact benchtop EZ-2 Series evaporator from Genevac has been designed to meet or exceed the solvent removal needs of most laboratory scientists.

EZ-2 evaporator series

Image credit: SP Scientific

Using the most advanced proven technology in evaporation science, the EZ-2 Series has been designed specifically for solvent removal in many areas of scientific research, whether concentration of samples or complete drying is required.

For many applications an optimized EZ-2 evaporator is available to suit your solvent removal needs. The EZ-Envi is created specifically for concentration of volatile solvents prior to analysis, the EZ-Standard for drying water and volatile solvents, the EZ-2 Plus for working with solvents with higher boiling points -  up to 165°C and the EZ-2 Elite for more difficult solutions such as DMSO and NMP, or fast freeze drying.  EZ-2 evaporators can be further modified for the most difficult and hazardous solvents, a special model exists for those working with potentially explosive solvents such as diethyl-ether.  Alternatively, for laboratories who remove concentrated acids and acid chlorides, a corrosion resistant construction EZ-2 HCl is the system of choice.

Each EZ-2 evaporator is compatible with a wide selection of sample holders enabling evaporation from sample container formats including round-bottom flasks up to 500ml, tubes up to 150mm long, vials, and custom reaction blocks as well as shallow and deep-well microplates.

Running an EZ-2 evaporator is easier than a rotary evaporator.  Just load your samples, select maximum safe temperature for samples, select solvent type and hit start. Offering true unattended operation through use of pre-programmed methods an EZ-2 Series evaporator requires minimal user training, even a beginner can competently use the system within 5 minutes.

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    SP Scientific Products. (2020, May 13). EZ-2 Series evaporator designed to suit solvent removal needs of most laboratories. News-Medical. Retrieved on September 19, 2020 from https://www.news-medical.net/news/20171121/EZ-2-Series-evaporator-designed-to-suit-solvent-removal-needs-of-most-laboratories.aspx.

  • MLA

    SP Scientific Products. "EZ-2 Series evaporator designed to suit solvent removal needs of most laboratories". News-Medical. 19 September 2020. <https://www.news-medical.net/news/20171121/EZ-2-Series-evaporator-designed-to-suit-solvent-removal-needs-of-most-laboratories.aspx>.

  • Chicago

    SP Scientific Products. "EZ-2 Series evaporator designed to suit solvent removal needs of most laboratories". News-Medical. https://www.news-medical.net/news/20171121/EZ-2-Series-evaporator-designed-to-suit-solvent-removal-needs-of-most-laboratories.aspx. (accessed September 19, 2020).

  • Harvard

    SP Scientific Products. 2020. EZ-2 Series evaporator designed to suit solvent removal needs of most laboratories. News-Medical, viewed 19 September 2020, https://www.news-medical.net/news/20171121/EZ-2-Series-evaporator-designed-to-suit-solvent-removal-needs-of-most-laboratories.aspx.

Comments

The opinions expressed here are the views of the writer and do not necessarily reflect the views and opinions of News Medical.
You might also like... ×
New EZ-2 evaporator for clinical biochemistry sample preparation