NEO BIL Plus is an advanced and innovative version of traditional bilirubinometers. It is to analyze the 'total bilirubin' through a microcapillary tube in order to follow the new born icterus course. More than 20 years of experience in this specific field and that of physics-chemestry have led us to this achievement. Thanks to the use of the most advanced technology, frequent adjustments and continuous standard resetting are over. A precise sample measurement of both bilirubin and interferentials on the same point of the capillary is carried-out by a special reading system. The reading is carried out even on a small quantity of serum. No reagents are required. NEO BIL Plus is equipped with a built in printer for the results sequential printing.
Technical features
| Intended use |
measurement of total bilirubin |
| Sample |
centrifuged whole blood |
| Serum |
minimum volume: 10 µl |
| Reading cuvette |
haeparinized haematocrit capillary |
| Measure unit |
mg/dl or µmol/l |
| Measurement range |
5/30 mg/dl or 85/510 µmol/l |
| Measure system |
photometric |
| Sample reading |
on a single-point of the capillary |
| Zero and checkings |
completely automated |
| Interferentials |
automatically compensated |
| Reading time |
3s approx. even on highly haemolized samples |
| Reading inaccuracy |
< 5% |
| Detector |
silicon photodiode |
| Optical filters |
455 and 575 nm |
| Programming |
by membrane keypad |
| Results |
on LCD and printer |
| Keypad |
17 buttons |
| Display |
2 lines with 16 columns |
| Printer |
20 columns with termal paper |
| Data storage |
last 1000 results |
| Interface |
USB port |
| Other functions |
built-in calendar and timer |
| Dimensions |
25 x 22 x 9 cm |
| Weight |
Kg 2,7 |
| Power requirements |
230/115 Vac, 50-60 Hz, 25 W |