DNBSEQ-T10×4RS from MGI Tech concentrates on fulfilling ultra-high throughput sequencing requirements.
Being different from normal sequencing flow cell and closed reaction systems that have been utilized in most of the platforms, DNBSEQ-T10×4RS makes use of dip-immersion biochemistry and open systems to obtain the best balance among sequencing read length, throughput, cost, and data quality.
- Ultra-high throughput: Data Output: 76.8 Tb/run
- Super Customization: The complete process can be tailored to offer 50,000 to millions of WGS needs
Image Credit: MGI
Table 1. Source: MGI
|DNBSEQ-T10×4RS Performance parameters
|Slide / Run
|Lane / Slide
|Effective Reads / Slide*
||45 B (PE100)
32 B (PE150)
* The maximum number of effective reads are based on a specific standard library run, and the actual application library will fluctuate depending on the sample type and library construction method.
Table 2. Source: MGI
||Data Quality Q30 *
||Run Time **
* The percentage of bases above Q30 is obtained by averaging metrics for runs using standard libraries. Actual performance is influenced by sample type, library quality and insert length, among other factors.
** The run time includes slide loading, sequencing, and generation of Cal. file. Cal. file is a binary file format generated by MGI sequencer basecall software.
Table 3. Source: MGI
||DNBSEQ-T10×4RS (Cat No: 900-000290-00)
|Power, Dimensions & Net Weight
||Power Type: 380V-, 50/60Hz
Rated Power: 22500VA
Dimensions(L×W×H): 7200 mm × 5000 mm × 1950 mm
Net Weight: ~10000 kg
|Operating Environment Requirements*
||Temperature: 19~21.5 °C fluctuation < 2 °C per hour
Relative Humidity: 40%RH ~ 60%RH, non-condensing
Atmospheric Pressure: 90 kPa ~ 110 kPa
Waterproof Rating: IPX0
|Basecall Computer Configurations
Internal Storage: 1.5T
SSD: ≥ 960GB
HDD: ≥ 40T
GPU:NVIDIA A100 80GB PCIE
*Can only be used indoors.
*Unless otherwise informed, StandardMPS and CoolMPS sequencing reagents, and sequencers for use with such reagents, are not available in Germany, Spain, UK, Sweden, Belgium, Italy, Finland, Czech Republic, Switzerland, Portugal, Austria, and Romania. Unless otherwise informed, StandardMPS sequencing reagents, and sequencers for use with such reagents are not available in Hong Kong.
*Products are provided for Research Use Only. Not for use in diagnostic procedures (except as specifically noted).