The Market Forge Sterilmatic STM-EL laboratory model is designed to sterilize and dry any material typically processed by autoclaving. A built-in control maintains the operating temperature at a preset level—up to 121 °C (250 °F) for standard models (see stock #N725). The adjustable control allows presetting to either 121 °C (250 °F) or 110 °C (230 °F), depending on application needs.
Timed sterilization (0–60 minutes) begins automatically once the operating temperature is reached. The unit quickly reaches 103 kPa (15 psi) operating pressure. The self-sealing door cannot be opened until steam pressure is fully exhausted, ensuring safe operation.
An exhaust selector lets you choose settings for liquids, instruments, or soft goods. Additional features include a 0–207 kPa (0–30 psi) pressure gauge, temperature gauge, low water cut-off, safety valve, thermostatic steam trap, and signal light. A stand is available at an additional cost.
Required connections: drain, 13 mm (1/2 in.) FPT or 16 mm (5/8 in.) O.D.; copper steam exhaust connection, 10 mm (3/8 in.) IPS. All models available for operation on single- or three-phase, three- or four-wire system. UL listed and CSA certified. 84 liters volume (3 cu ft). It has to be hardwired in the location of use.
Manufactured in Canada
- The item is shipped from Canada.
Accessories
Optional accessories for an additional cost:
- Autoclave Stand, With Shelf
- Tray, 12×20×2”
- Tray, 12 ×20×4”
- Tray, 12×20×6”
- Basket, 12×20 ×2”
- Basket, 12×20×4”
- Sterilizer Exhaust Condenser