SteamScrubber Glassware Washers are designed to wash and dry a variety of wide-mouth and general-purpose laboratory glassware.
A 5-inch touch screen display running CleanWorks OS allows users to control wash settings and parameters. The washer can reach a maximum temperature of 93 °C (199 °F) to help remove difficult contaminants. Heated air is introduced into the chamber to dry glassware completely.
SteamScrubber models come with stainless steel Upper and Lower Standard Racks that accept basket inserts for a range of wide-mouth labware and other items.
Specialized inserts are available for items such as test tubes, culture tubes, small utensils, BOD bottles, and petri dishes. The washer can also be used with Upper and Lower Spindle Racks (for drying through spindles, see FlaskScrubber washers).
Features
Materials/construction:
- Aluminum-backed insulation and fiberglass thermal blanket
- Factory-installed drain hose and band clamp
- Two-year warranty on parts and labor
- Made in the USA
- IQ/OQ available
- Upper and lower standard open racks of 304 stainless steel
- 304 stainless steel top, door, tank, upper and lower wash arms. Freestanding models also have stainless steel exterior sides and top
- One-piece, tool-free, stainless steel, fine mesh particle drain filter
- Four leveling feet offering increased height adjustability
Performance:
- Forced air drying into the tank is programmable for up to 240 minutes and from 25-80 °C (77-176 °F)
- Electronic door latch with SpeedVent Technology for faster drying
- Detergent dispenser for powder or liquid detergent
- Level-sensing 6 ml rinse aid solution dispenser
- Operation at or below 62 decibels
- A steam generator that generates hot vapor to aid in eliminating tenacious contaminants from labware
- Pump rated at 96 gal/min (363 L/min) when operated at 115 V, 60 Hz, and 208/230 V, 50 Hz and 112 gal/min (424 L/min) on 208/230 V, 60 Hz
- Water temperature up to 93 °C (199 °F)
- Synchronous drain pump rated at up to 4.2 gal/min (16 L/min)
- For up to eight pure water rinses, a purified water pump will provide non-pressurized filtered water into the tank
Controls/user interface:
- Setpoints that can be calibrated include temperature, fill volume, and detergent dispensing
- Self-diagnostics to help in maintenance and troubleshooting
- Password protection to secure washer from unauthorized changes
- User configurable delayed start (up to 12 hours)
- USB data output
- Full color touch screen display with CleanWorks OS providing full user control
- 9 factory-set programs: RINSE ONLY, PLASTIC, GLASS, GLASS PLUS, LIFE SCIENTIFIC, ANALYTICAL, DRY ONLY, ECO WASH, CLEAN WASHER. Up to 200 user-defined programs
- Clear and specific alarm display
All models require (not included)
- Hot tap water pressure of 20-120 psi (138-827 kPa)
- Hot water inlet flowrate of =1.25 gpm (4.7 lpm), pure water inlet flowrate =0.9 gpm (3.4 lpm)
- Optional purified water pressure 0 psi (0 kPa)
- Dedicated electrical circuit (select based on model): 20 A for single-phase 115 V, 60 Hz and single-phase 208/230 V, 50/60 Hz; 30 A for three-phase 208/230 V, 50/60 Hz
- Hot water connection with a male 3/4-11 1/2 GHT hose fitting
- Recommended inlet water temperature 120 °F (49 °C)
- Water consumption per fill 3.4 gal (12.9 L)
Options include:
- Single-phase (1.2 kW, 2 kW) or three-phase (6 kW) electrical
- Freestanding and undercounter styles
- Clear tempered safety glass viewing window and 25-watt LED interior light that illuminates washing chamber
Manufactured in USA
This item is shipped from the United States.
Accessories
Comes complete with:
- Upper and lower standard open racks
Optional accessories available at additional cost:
- Freestanding-to-Mobile Conversion Kits
- Drain Water Cooling Kits
- LabSolutions detergents and rinse
- WaterPro RO System
- Upper and lower Standard and Spindle Racks
- Baskets and inserts
- Glassware Holders
- Base Stand