Type number
|
C9100-24B
|
Camera head type
|
Hermetic vacuum-sealed air/water-cooled head*1
|
Window
|
Anti-reflection (AR) coatings on both sides, single window
|
AR mask
|
No
|
Imaging device
|
Electron Multiplying Back-Thinned Frame Transfer CCD
|
Effective number of pixels
|
1024 (H)×1024 (V)
|
Cell size
|
13 μm (H)×13 μm (V)
|
Effective area
|
13.3 mm (H) × 13.3 mm (V)
|
Pixel clock rate (EM-CCD readout)
|
22 MHz, 11 MHz, 0.6875 MHz
|
Pixel clock rate (NORMAL CCD readout)
|
0.6875 MHz
|
EM (electron multiplying) gain
|
1×, 10× to 1200× (typ.)*2
|
Ultra low light detection
|
Photon Imaging mode (1, 2, 3)
|
Fastest readout speed
|
18.5 frames/s to 314 frames/s*3
|
Readout noise (EM-CCD readout)
|
15 electrons (EM gain 4×, at 22 MHz) (rms) (typ.)
10 electrons (EM gain 4×, at 11 MHz) (rms) (typ.)
3 electrons (EM gain 4×, at 0.6875 MHz) (rms) (typ.)
1 electron max. (EM gain 1200×) (rms) (typ.)
|
Readout noise (NORMAL CCD readout)
|
10 electrons (at 0.6875 MHz) (rms) (typ.)
|
Full well capacity
|
EM-CCD readout: 400 000 electrons (Max. 800 000 electrons) (typ.)*4
NORMAL CCD readout: 50 000 electrons (typ.)
|
Analog gain
|
EM-CCD readout (22 MHz): 1×
EM-CCD readout (11 MHz/0.6875 MHz): 0.5×, 1×
Normal CCD readout: 1×, 2×, 3×, 4×, 5×
|
Cooling temperature (Forced-air cooled)
|
At temperature control: -50°C (Room temperature 0°C to +30°C, at 22 MHz)
At temperature control: -55°C ((Room temperature 0°C to +30°C, 11 MHZ, 0.6875 MHz. Normal CCD readout)
At maximum cooling (typ.): -65°C (Room temperature: stable at +20°C)
|
Cooling temperature (Water cooled)
|
At temperature control: -65°C (Water temperature: +20°C, at 22 MHz)
At temperature control: -70°C (Water temperature: +20°C, 11 MHZ, 0.6875 MHz. Normal CCD readout)
At maximum cooling (typ.): -80°C (Water temperature: lower than +10°C)
|
Temperature stability (Forced-air cooled)
|
±0.01°C (typ.)
|
Temperature stability (Water cooled)
|
±0.01°C (typ.)
|
Dark current (Forced-air cooled)
|
0.01 electron/pixel/s (-65°C) (typ.)
|
Dark current (Water cooled)
|
0.001 electron/pixel/s (-80°C) (typ.)
|
Clock induced charge
|
0.01 events/pixel/frame (typ.)
|
Exposure time (Internal sync mode)
|
52.7 ms to 1 s (22 MHz)
103.2 ms to 2 h (11 MHz)
1616.9 ms to 2 h (0.6875 MHz)
|
Exposure time (External trigger mode)
|
10 μs to 1 s (22 MHz)
10 μs to 2 h (11 MHz, 0.6875 MHz)
|
A/D converter
|
16 bit
|
Output signal/External control
|
IEEE1394b
|
Sub-array
|
Every 16 lines (horizontal, vertical) size, position can be set
|
Binning
|
2×2, 4×4
|
External trigger mode
|
Edge trigger, Level trigger, Start trigger, Synchronous readout trigger
|
Trigger output
|
Exposure timing output, Programmable timing output (Delay and pulse length are variable.), Trigger ready output
|
Image processing features (real-time)
|
Background subtraction, Shading correction, Recursive filter, Frame averaging, Spot noise reducer*5
|
EM gain protection
|
EM warning mode, EM protection mode
|
EM gain readjustment
|
Available
|
Lens mount
|
C-mount
|
Power supply
|
AC 100 V to 240 V, 50 Hz / 60 Hz
|
Power consumption
|
Approx. 140 VA
|
Ambient storage temperature
|
-10 °C to + 50 °C
|
Ambient operating temperature
|
0 °C to + 40 °C
|
Performance guaranteed temperature
|
0 °C to + 30 °C
|
Ambient operating/storage humidity
|
70 % max. (with no condensation)
|